Muy buen producto.Ha sido muy fácil conectar el disco de estado sólido e introducirlo en la carcasa para comenzar a copiar datos en él.La carcasa es metálica, de muy buena calidad y además tiene un LED de actividad (read/write) que pocos fabricantes implementas en ellas.¡¡ El cable USB 3.0 incluido no puede ser de mejor calidad !!TODO PERFECTO.

Helps you recover data from the internal SSD of Laptop, whose Motherboard got damaged. Remove SSD from the Old Laptop, insert SSD carefully inside the SSD Enclosure and attach it to a functioning Laptop. Copy data from the SSD to the functioning Laptop.

Idéal pour transférer le disque dur SSD de votre vieil ordinateur et pouvoir continuer à l'utiliser comme un lecteur amovible.

Worked like a charm and it was for the right HDD

Todo bien, gracias...

Excelente producto y calidad, materiales solidos y cable de buen tamaño.

Le puse un ssd de una lap viejita que ya no servía, tiene muy buena velocidad de escritura.Decidí utilizar este SSD para instalarle linux (no live) y utilizarlo en mis clases cuando voy al colegio, las computadoras de ahí son extremadamente lentas, lo único que hago es bootear desde el ssd y listo, tengo linux en la compu.

Excelente producto, buen precio y el material con el que esta fabricado muy bueno, sencillo y elegante de aluminio

Él adaptador es de muy buena calidad, en mí opinión:Ventajas:El case es de metal.Soporta protocolo UASP.Funciona en Distros GNU/Linux.Cable de buena calidad.Tiene manual y desarmador.Desventajas:Solo he notado que se calienta mucho la case al formatear la SSD.

ESBueno, excepto que 1) casi no hay ventilación y 2) el LED de actividad está en el mismo lado que el enchufe del cable, por lo que no es visible cuando el gabinete está sobre su escritorio. La mejor idea sería tener uno encendido cada lado.ENGood except that 1) there is almost zero ventilation, and 2) the activity LED is on the same side as the cable socket, so it's not visible when the enclosure is sitting on your desk. Best idea would be to have one on each side.

Me preocupaba la calidad del producto, sin embargo, tiene buenos materiales, un buen cable y en general se siente de calidad. Además, tiene un acceso a la bandeja muy sencillo.

Funciona bien, y el diseño es bueno.

Very nice, small piece of equipment, for a good price.I ended up buying two of them because I was worried about reliability. I tested them out somewhat extensively and both seem to work as advertised. Long term, I'm unsure of how they will hold up, but they seem legit. Hopefully I can address a few complaints that I read in the reviews.The design is nice and simple, clean, and appears to be machined well. It doesn't have a big, glowing logo on the front of it like some designs, which I'm really happy about. It's TINY. I would prefer a shorter USB cable, but don't mind the one supplied. It's short enough for my needs. Even the tiny LED light is unobtrusive, unlike some items where the LED lights up a dark room.I'm using it with a Samsung 1TB EVO 850 mSATA drive, with a 2015 13" Macbook Pro. I cloned my internal 1Tb drive to the external one, copying about 650Gb, which took over an hour to complete. That may sound like a long time, at about 180MB/s, but I'll explain that later...After the drive was cloned, I booted from the external mSATA drive without a problem in both of my enclosure units (just swapped out the SSD).The enclosure gets hot. Obviously. It's supposed to get hot. That means it's doing it's job properly as a heatsink. With the amount of data I was transferring, I shutter to think how hot the Samsung "T1" drive would get with it's plastic casing. Plastic is an excellent insulator, and aluminum is a much better choice as a heatsink. If anyone is unaware of the Samsung T1, look it up. I was trying to replicate that, except with better components.The enclosure got too hot to the touch midway through the cloning process. After touching the device for about 5-8 seconds, it became too unbearable to touch. It didn't really burn me, just was painful, and not unlike the heat produced by my spinning mechanical drives.While it was running at that temperature, copy speeds seemed to be about 150MB/s. I believe this is due to the Samsung 1TB EVO 850 design that intentionally throttles the write / read speed to protect itself. I had read that drives of less capacity in the EVO 850 line perform a lot better because they don't get so hot (something about power management).Things got interesting when I placed the drive on top of a piece of thin aluminum as an additional heatsink. The drive almost instantly cooled to the point where I could hold it in my hand. After that, copy speed picked up visibly. I'm sure that in a pinch, if you needed to work that drive hard, you could place it on some aluminum foil and that could further dissipate the heat.For my purposes, I'm using it for data back up when I travel. So all of my media should be backed up and in my pocket at all times, unless of course I'm using the laptop. I always keep the two copies of files in separate places in the event of theft. This little 1TB mSATA drive is going to be AWESOME for that, and fat better than my old LaCie rugged mechanical drives.If you want to use this as an external boot drive, I'd recommend going with a more traditional format, since these small form factor drives are not really meant to be in an environment without adequate cooling.If you are like me and you want a tiny little USB drive that can hold 1TB of data that you occasionally need to read and write to, look no further. A Samsung 500GB mSATA SSD may be even better if you don't need the capacity.