No hay artículos en el carro
No hay artículos en el carro El paqueteincluye
1 x esponja de pintura
características
- material: esponja esponjas de artista
: los bordes están cortados cuidadosamente, sin asperezas, y el patrón de impresión es una esponja de pintura más clara.
: ayuda a terminar la arcilla suavemente, es suave con las caras para la esponja de dibujo de pintura facial.
: la esponja se puede utilizar para la impresión de , la interacción entre maestros y con esponja de pincel artístico.
: úselo con acrílicos, aceites, acuarelas, pinturas para tela y tintes, puede crear artesanías decorativas con pincel de esponja.
- los pueden usar la esponja para crear formas y diseños únicos a voluntad esponjas de acuarela.
descripción del producto
esponjas para arte ¿está buscando una esponja duradera y al mismo para pintar? ¿Está buscando una esponja para pintar resistente y confiable que pueda realizar múltiples trabajos? es así, ¡no busques más! nuestra esponja de pintura debe satisfacer sus necesidades
chris
Comentado en los Estados Unidos el 29 de marzo de 2025
These are perfect for my 2013 f250 2WD. I'm only 2 IQ points over handicapped so I didn't end up setting them correctly, but that's ok, I'll pay to be dumb : )I put these on because I put a 2" leveling kit on the truck. t's a very tight fit, but I was able to get them started by spraying everything down with WD40, setting a rubber mallet on top of the bushing then smack the bajesus out of the mallet with a dead blow, once it's started you can give em a few good walks with a dead blow and they'll seat. I didn't experience any mushrooming like one other comment mention.
Shara melisa
Comentado en México el 14 de marzo de 2025
No sirve es una basura el metal es muy blando se deforma enseguida y no abraza la rotula y provoca el bamboleo de la muerte además que debes lijar para que entre el diámetro es ligeramente mayor al del original no lo compres
Mccook
Comentado en los Estados Unidos el 23 de diciembre de 2024
Nicely made.easy to install
Davio
Comentado en los Estados Unidos el 30 de octubre de 2024
Says it fits but it is about a 1/32" too large in diameter.
Adrian Moritz
Comentado en los Estados Unidos el 4 de septiembre de 2024
Good value
Vette guy
Comentado en los Estados Unidos el 12 de septiembre de 2024
I do not know why these are literally 1/4 the price of the Moog bushings, but the material is a bit soft.Otherwise I don't know how the Moogs could be any better. If you are an average hobbyist wrencher you can install these. As mentioned the material is a bit soft so do not try to beat them into the upper ball joint support or they will mushroom (ask how I know). In my case I needed to wedge the opening apart so they could be tapped in lightly. Same for making adjustments - I needed to wedge the opening apart to allow them to rotate freely enough to turn the inner and outer bushings with a pair of channellocks. It took me a few hours but I was able through trial and error to get these set up with max caster and also adjust the camber right where I wanted it. You will need to be patient and determined to get this done in your driveway and understand how to compensate Left and Right camber for the unlevelness of your driveway. After you are done setting camber/caster you'll also need to reset the toe. If you take it as a challenge you can accomplish this to improve your motorhome (or other Ford E350/450 application) handling. Or you could just install them at 0/0 and take them to a shop that knows how to adjust them. I had to call around but I did find one in my area that knew about them and knew how to adjust them - as a backup if I failed in my driveway attempt. The absolute worst part of dealing with these was trying to find the chart that shows the letter settings you need to use. Nothing comes with it and the chart on the Moog site is horrible and you cannot read it. I found one finally which I will attach here.
Productos recomendados
Mex $149.00
Mex $ 81 .00 Mex $81.00
Mex $220.00
Mex $ 123 .00 Mex $123.00