No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Portatarjetas de identificación de bloqueo
Diseño de bloqueo permanente para una tarjeta de identificación más gruesa o dos tarjetas de identificación de tamaño estándar
La pieza final se bloquea en su lugar y no está diseñada para ser quitada. El soporte de la insignia debería romperse para quitar la tarjeta (o tarjetas), así que elige sabiamente Carga superior para hasta 2 tarjetas (1 Prox grueso o 2 tarjetas de crédito estándar). Ideal para profesionales de seguridad, personal de oficina, empleados gubernamentales y trabajadores de la salud. Ideal para tarjetas de proximidad, tarjetas clave e insignias de acceso. Se puede acceder a tarjetas con chip RFID, sin contacto y códigos de barras con un lector de escáner a través de la carcasa transparente.
Soporte para insignias a prueba de manipulaciones
Mantén tus credenciales seguras con un diseño de bloqueo permanente resistente a manipulaciones, "bóveda bancaria" que evita que pierdas tus tarjetas de identificación
Protección de tarjeta a largo plazo
Hecho de policarbonato resistente, este soporte de placa resiste grietas y roturas para el uso diario en entornos exigentes
Muestra y escanea fácilmente
Transparente para mostrar la insignia visible y escanear el código de barras sin quitarlo. Ideal para tarjetas de membresía anuales, identificaciones de estudiantes, insignias de trabajo y mucho más
Kimberly
Comentado en los Estados Unidos el 11 de enero de 2025
I’m so happy to have purchased this item!!! I’ve lost my badge 3 times due to flimsy unsecured badge holders. This was the best decision I’ve ever made. It will not slide out and fit well with my lanyard. I’m finally able to hold on to my work ID without fear of losing it again. On another note, my bade is now safe from rain, snow, and spills. The thickness of this item protects my badge from bending and from scratches. The permanent lock is exactly that. I should’ve ordered this 3 months ago.
E. Engel
Comentado en los Estados Unidos el 17 de noviembre de 2024
If you are worried about the vinyl sleeves tearing, this is a good upgrade for you. A little thicker than I need, but so far fine.
Ge-off
Comentado en los Estados Unidos el 22 de junio de 2021
To be fair I should preface this review with a disclaimer. I work for a beer distributor and my job is certainly not a desk job. Lots of moving heavy objects, tractor-trailers, slamming doors, and so on.I had high hopes.. It's a simple product and seemed sturdy. In the end, the top piece that connects to your lanyard snapped right off within a few hours of me going to work. I think if you are staying in the office behind a computer this product might be ok but if you are out and about doing physical work it's probably going to break.
Elizabeth M.
Comentado en México el 4 de diciembre de 2020
Artículo incompleto!! Viene sin la tapa de arriba
Randy Jenkins
Comentado en los Estados Unidos el 24 de marzo de 2017
I kept breaking my ID card at work and was getting tired of replacing it. I saw this product and thought it would be the perfect solution and it is. It is very very sturdy. My main issue at work was that the badge holders I had been using were flexible and when I would lean against a part, it would bend and then my badge would stop working. The Specialist ID holder is very solid, doesn't bend/flex and works great. It is permanent, however, so I made sure to get a brand new badge before "locking it" into the holder. Everything came very well packaged and it's super simple to use. Simply drop your badge in, clip the top in and done. My only issue, which is very minor, is that I liked to put other things in my holder with my badge, like image cards with comic book characters on them and such, but they do not fit in this holder. Not a big deal, however. This is a great product and definitely worth the $6 I paid for it.
G.L.W.
Comentado en los Estados Unidos el 5 de enero de 2015
I had another card holder from the Badge Brothers that I liked (the "rigid fuel card holder with key ring by specialist ID") but wanted to get a second card holder for my guest/visitor metro card. I opted for a more permanent one this time, since I didn't see any reason this card would need to come out of its case. This one differs from that other holder in a few respects:- It isn't quite as clear plastic, as other reviewers have noted. It's not really "frosted," but it's not crystal clear like the other one was. Maybe just a little hazy, somewhat like an anti-glare screen protector. I can still read the text on the card inside perfectly fine (see photo comparison).- The top has angled pieces that lock into slots on both sides, creating a "permanent" lock. I haven't tried to remove it yet, but it looks like you could theoretically pop it open with some paperclips or small screwdrivers -- so permanent in the sense that it'd be incredibly difficult for this to just pop off on its own, but not permanent in the sense that you absolutely have to break something to get it open. Although the top of mine didn't really "click" into place like I was expecting it to and the top doesn't line up perfectly (see photo), I pulled on it and it doesn't seem like it's going to come off any time soon.- It's a bit thicker than the other card holder. Not twice as thick, but maybe another 2mm thicker.- The metro card fits EXACTLY in it, height-wise. Make sure your card length is NO MORE than 3 3/8" or ~85.7mm, or the top will not snap in. There's a little more wiggle room width-wise, but not much. The other card holder has more wiggle room.- It doesn't come with a key ring on top. I know: it's not pictured with one and the description doesn't mention one, but I was expecting it to be similar to the other card holder I bought except fully encapsulated. My fault for not paying attention, but wanted to note this just so others are forewarned.One more thing: mine did not have that middle plastic tab shown in the picture--it has 4 tabs connecting the top to the case, not 5. I don't think it matters, but I just wanted to point that out.Edit Sept 2016: As some other reviewer noted, the area by the "tabs" cracked, so to keep pieces from falling off, I just put a piece of scotch tape around the rim of the holder over all the tabs, which worked fine to keep it all together. What bothered me more was that the top part, that a lanyard or keychain attaches to, also eventually broke off. (I kept it in a purse 95% of the time, taking it out only to swipe it on the bus or metro, so it's not like it was going through some heavy duty abuse.) Even if I didn't want to keep it on a keychain, it was still a jagged top to the card that got annoying. I eventually broken open the casing and I'll probably replace it with a new one, but just a warning that this badge holder probably won't last more than a year before starting to fall apart.
Productos recomendados
Mex $412.30
Mex $ 210 .00 Mex $210.00
Mex $260.99
Mex $ 148 .00 Mex $148.00
Mex $118.65
Mex $ 64 .00 Mex $64.00
Mex $466.67
Mex $ 252 .00 Mex $252.00
Mex $250.62
Mex $ 125 .00 Mex $125.00
Mex $435.32
Mex $ 213 .00 Mex $213.00