No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Pies de aislamiento de audio de alta fidelidad con textura metálica perfecta y apariencia elegante
.
.
Separa el componente de audio de la vibración, lo que resulta en graves de sonido más estrechos y limpios
/ Alta dureza y densidad, alta amortiguación, tonos más enfocados, más brillantes con menos ruido, vibración absorbente de goma antideslizante
.
/ Características de alta atenuación para mantener el sentido de la cantidad baja/ajusta la altura del tornillo para obtener diferentes efectos de sonido/superficie de chorro de arena tridimensional/eleva la sensación de línea de alta frecuencia y sentido simple/un juego de pies de punta soporta 100 kg/200 libras de peso/no hay necesidad de hacer agujeros o calcomanía para evitar dañar el dispositivo y el computadora
.
Gestiona la energía del altavoz para reducir las vibraciones que resonan a través de la superficie de soporte y la reflexión interna para quitar el sonido disonante.
Diseñado para altavoz de alta fidelidad, amplificador de tubo, tocadiscos, reproductor de CD/DVD, grabador, DAC, etc. (100 kg / 220 libras de carga)
.
keith baer
Comentado en los Estados Unidos el 1 de abril de 2025
Very cool looking and they isolate well for my turntable
Josh Painter
Comentado en los Estados Unidos el 1 de abril de 2024
I can't say that I have any dislikes about them. A little bit bigger as if round wise, but the height in how they're built are great. They're very well built and I highly recommend them. I got them underneath my amplifier I've got a vacuum tube amplifier that vibrations can mess with the sound and I got two subwoofers and one on each side and two Klipsch Tower speakers and they work very well. They cut out the vibrations. You're looking for something to cut out vibrations for a cheap price. This is itThis is an update. If you have a tube amplifier, do not use this because it causes vibration. Sounds to go through your tubes right into your speakers. I was using it so that way the bottom of my tube amp can get air cuz it's not very much of a lift. It's only off the table by a quarter of an inch so I use these to lift it up higher so that'll weigh plenty of air can flow in well. Don't use these. You can't hear it too much when you're watching TV or when you listen to loud music on Spotify. But at the very minute you use at turntable you can hear vibrations bad. I couldn't figure it out because they're made to stop vibrations but as soon as I took these out the vibration stopped. Other than that, if you want to use them for a subwoofer then go for it they're great!
Tim
Comentado en los Estados Unidos el 8 de abril de 2024
Used these to isolate my turntable from cabinet. Great price and they worked perfectly!
Dominic Puliti
Comentado en los Estados Unidos el 8 de enero de 2023
Results better than expected. It was placed under my turntable with two of the pucks placed in the rear and only one placed in the front to form a triangle configuration. The two in the rear were placed so that the pointed brass was facing down into the cup and the front one was facing up with the cup sitting atop on the pointed brass.
Michel
Comentado en Canadá el 10 de febrero de 2022
Installé sous ma table tournante, ça a changé tellement l' isolation que je peux sauter dans le salon, claquer la porte et la musique continue sans soubresauts! Très esthétique aussi.
Productos recomendados
Mex $226.00
Mex $ 115 .00 Mex $115.00