No hay artículos en el carro
No hay artículos en el carroGuyker - Tuerca de guitarra ajustable de 43 mm - Bola de acero inoxidable ajustable tuerca de regulación dividida piezas de repuesto compatibles con guitarra estilo Gibson Les Paul LP
t.brumm
Comentado en Alemania el 27 de agosto de 2024
Das Teil funktioniert im Prinzip gut, wenn nicht die scharfen Ecken und Kanten wären. Und wenn der Schlitz für den Saitendurchlaß der E-Saite ( griffbrettseitig ) breit genug wäre.Nun, für Bastler ist das kein Problem, man kann den gesamten Sattel auseinandernehmen, entgraten, etwas abrunden, und dann paßt alles.Für meinen Selbstbauhals mit 17 Zoll Griffbrettradius perfekt!Und nicht vergessen: das Griffbrett am Sattelende um 3 mm kürzen, damit mit der Mensur alles stimmt.Bei einem Neubau ist das ja kein Problem und nachträglich auch kein Hexenwerk😀
ibai
Comentado en España el 22 de mayo de 2024
Es unos milímetros más ancho que la cejuela de la Gibson por lo que la única forma de instalarla sería modificando la guitarra. La descripción es engañosa ya que asegura ser compatible con Gibson Les Paul y recalco esto porque no pone epiphone u otra marca, dice Gibson. Las medidas que aparecen son poco claras, en definitiva es una estafa.
Zachary Peters
Comentado en los Estados Unidos el 20 de febrero de 2024
Installation on an Epiphone Les Paul Special II took about 3 min. No sanding/filing of fretboard material needed whatsoever. Intonation and tuning at 1st fret is perfectly fine, confirmed with a tuner. This is because Guyker made this roller nut 180° backwards compared to the Fender LSR roller nut, string to nut contact from the 1st fret is exactly the same as the stock plastic nut this Guyker roller nut replaced. Super easy to install and the monumental difference was realized the first time tuning up. The stock tuners are no longer an issue since the strings are now on roller bearings, so I'll be keeping the stock tuners on this guitar, no reason whatsoever to change them out, so that saved about $60 for "real" tuners. When this nut was adjusted to desirable height, wow! This guitar plays like a very expensive guitar now. It could not be easier to do a superb action height setup with this nut. HIGHLY recommended! At this price, you can't go wrong, do it! You won't be disappointed.
Jay
Comentado en los Estados Unidos el 5 de enero de 2023
I’m writing a review to help some save their guitars from some weird suggestions about this nut.It was a slip replacement for my LP style, took minutes to install, looks and plays great, take the old one out, clean the site , a drop of glue for the base string the guitar and adjust the hight (very minor adjustments to the saddle might be needed) there is absolutely no need for cutting and filing…etc, please don’t cut anything, if your guitar’s nut is the same size you don’t need crazy modifications…. No it will not mess with your scale and intonation beyond the minor saddle adjustments.
Nymphadora
Comentado en los Estados Unidos el 30 de septiembre de 2023
I build my custom guitars with a zero fret.....If you don't have a zero fret this will put your guitar way out of intonation. Before you take the old nut off, measure the nut to the first fret. This HAS to be the same when you put this new nut on, which it will not be. You'll have to remove the very end of the fretboard by about 3mm or so, so when the string goes over the balls, it will be the same distance from the first fret as your old nut. Don't try to fake it and you will have a great ball bearing nut. Odd, this unit comes with absolutely NO instructions if you're a newbie.
Productos recomendados
Mex $447.60
Mex $ 210 .00 Mex $210.00
Mex $682.41
Mex $ 313 .00 Mex $313.00
Mex $1,270.00
Mex $ 635 .00 Mex $635.00
Mex $1,800.00
Mex $ 774 .00 Mex $774.00