No hay artículos en el carro
No hay artículos en el carro Especificaciones :
Corriente de salida: 150A
Corriente promedio positiva de entrada trifásica: 50A
Voltaje inverso de pico repetitivo (VRRM): 1600V
Corriente inversa pico repetitiva (IRRM): 10 mA
Voltaje de aislamiento (Viso): 2500VCA
VTM: 1.5V
ITM: 150A
Fase: Fase única
Terminales: 4
. Temperatura de unión: 150
Tamaño: 78 x 40 x 35 mm/3.07 x 1.57 x 1.37 "
Cantidad: 1
El paquete incluye:
1 x puente rectificador
nh19926
Comentado en los Estados Unidos el 13 de agosto de 2022
Updated Aug 17, 2022:I just finished setting my system up and can confirm these bridge rectifiers are garbage and not rated at 150A as claimed..... I will be returning this one too. I am using an expensive 75A regulated supply going to my battery banks. I wanted this item for isolation; I could have used a single diode but went with a bridge. I kept getting strange readings and losses in voltage, not what I would expect for diodes (single or in a bridge). Voltages kept varying between the input side and DC output side, sometimes crashing (breakdown). I tried different digital meters I had. It appears the diode was breaking down with high current. I used my Fluke clamp-on and my supply was supplying 66.4 amps, well under the 150A claimed. Long story short... I removed this bridge rectifier and connected directly and all worked fine.*************I bought 2 of these and now kinda regretting it... will try 1 of them. The package is very small. I had to add a CPU heat sink and fan (SEE PIC). The terminals on this single phase rectifier are way too small to be rated at 150A. Also listing talks about 3 phase and this is a single phase (top pic). Also mentions 50 Amps, not 150 Amps as listed in heading.It says: "This high power bridge rectifier can be widely used for power supply. The three phase input positive average current of the product is 50A". - Well I guess no one from the company read this listing.I tried to report incorrect info, but not working. Might return the unused one... get my money back. For comparison, look at my 100A rectifier (lower pic) as compared to this cheap one. My 100 Amp unit has heavy large terminals and a massive heat-sink and supports #4 GA wire. The 150A rectifier has small terminals (maybe 14 or 16 GA) I have to modify lug terminal to support the one I am testing, and I have not even put a load on it yet.... Will be testing it at 75 amps and see what happens.
Productos recomendados
Mex $193.17
Mex $ 96 .00 Mex $96.00
Mex $275.00
Mex $ 148 .00 Mex $148.00
Mex $334.70
Mex $ 170 .00 Mex $170.00
Mex $128.99
Mex $ 64 .00 Mex $64.00