No hay artículos en el carro
No hay artículos en el carroChris
Comentado en Canadá el 11 de marzo de 2025
Using this to control the water pump on my hydro system. I use to run the pump full time, but I burnt out pumps and it would heat up the water. This is so simple to use. Now my water stays cool, pumps last longer and the plants get watered on a schedule. Should of bought one sooner!
Jeremy B.
Comentado en Canadá el 25 de febrero de 2025
We've been using this cycle timer for over a year at our off grid AirBnB property in northern Ontario. We built it into a weather proof housing that is mounted to the side of the house. Its wired to the filter pump in our wood fired hot tub. We have it turn on for 7 mins every 8 mins during the winter which helps prevent freezing of the plumbing under the tub. We change the duration in the summer months to longer on, longer off. Its been working great all along. We bought a 2nd one to have as a spare.
Eric
Comentado en los Estados Unidos el 15 de enero de 2025
Here is my situation. I run an air compressor overnight to spray water in CNC machine as it's cutting a long runs. I only need to spray water every so often and this seems to be a super easy way to run my water every 10 minutes for 3 minutes increments. Works perfectly! I've played around with different lengths of time I need to use the water and found the perfect runtime.
MARTIN HELLMAN
Comentado en los Estados Unidos el 16 de febrero de 2024
This is a really good repeat timer and I highly recommend it. I use it to turn a hot water recirculator on for 1 minute and off for 13 minutes since it’s designed for an apartment building and pumps way too much water for our home. I also bought the BN-LINK analog repeat timer, but much prefer this one. I’ll be returning the analog timer and buying a spare digital timer in case this one fails.The analog timer worked OK, but had several problems that were fixed with this one. The analog knobs were too easily moved when installing the timer, whereas the digital setup option is simple and intuitive. Plus the digital readout tells you which is counting down, ON or OFF, and how long before it turns to the other state. The analog timer didn’t have such an indication.I looked at the instructions and decided to try it on my own and that worked. Hit SET once to enter setup mode. Hit SET again to go from HH:MM to MM:SS for the first setting, then hit SET each time you’re happy with the numbers, etc. I have it in series with a Z-Wave switch that is set to turn on at 6:30 AM and off at 11:30 PM. If we want hot water during the night, all I have to do is use TotalConnect 2.0 to turn on the Z-Wave switch, which automatically starts this timer in its 1 minute on mode. It then goes to 12 minutes off. If I want to save energy, I then need to turn it off with the Z-Wave scene turning it back on at 6:30 AM.
Customer
Comentado en Canadá el 11 de noviembre de 2022
I bought it to use it with my soldering iron which reaches a lottemperature (it flies) and I have to unplug it from the power outlet to be able tosolder the electronic components so that they do not get damaged due to the high heatand the high temperature it reaches. With this timer I can make itturn off and on and just keep a good temperature I currently have itworking on the scale of 1 minute ON and 30 sec OFF and it works perfect just likethe soldering iron that heats up just enough for my work. I certainly recommend the productit is solid and very easy to program, the interface is intuitive I could say thatIt is not necessary to read the instructions on how to program it because it is very clearthe buttons are explanatory. Another important thing to say is that it seems to havean internal battery since the programming that I put on it is maintainedeven after disconnecting it from the power which helps a lot too,since you don't have to reprogram it.
Productos recomendados